Wednesday 30th March 2022 | Round iLLUMi Lightbox | issue 001
MATERIAL DATA SHEET FOR
DIMENSIONS: All dimensions are in millimeters and subject to normal manufacturing variations. The Basin Lab reserves its right in design and performance of its products. This right is therefore reserved to vary specifications without notice.
Waste outlet hole: 63mm
Cut out size: 335mm
For BEST PRACTICE Basin installation please refer to our website thebasinlab.com – Menu – Installation Guides – where you will find step by step instructions and a video, giving you trade secrets to achieving the best result.
Electrical: The iLLUMi TM LED System is 24 volts (low voltage) you simply plug it into an existing 240 volt power point inside your vanity, or have your electrician fit a power point for you and wire it to a light switch allowing operation from the switch.
You also have the option of having your electrician install a movement sensor into the light switch allowing the basin to turn on and off with movement, essentially turning your basin into a night light, then we recommend CABAC – HNS050MD – MOTION DETECTOR, this sensor must be used with one of these switches,
HNS410TM Minute Timer 2-wire HNS440TM Minute Timer 3-Wire
HNS420TM Hourly Timer 2-wire HNS450TM Hourly Timer 3-Wire
Always ask your electrician for their recommendation